TKR5026 – Wing Mount, Body Mount Set
Related Products
TKRBB15214 – Ball Bearing (15x21x4, 4pcs)
€11.99
TKRBB15214 – Ball Bearing (15x21x4, 4pcs) Inner axle bearings used with the new .4 CVA drive shafts. The .4 CVA’s have been redesigned with an oversized ball joint to reduce wear, resulting in improved consistency. The stock UNI’s excel in bumpy conditions but on smoother tracks, our new CVA’s are usually going to yield faster corner speeds, qu...
TKR5363 – Air Filter Foams (inner, outer, pre-oiled, 3pcs ea, NB48, NT48)
€11.99
TKR5363 – Air Filter Foams (inner, outer, pre-oiled, 3pcs ea, NB48, NT48)
TKR1235 – Body Clips (angled, 10pcs)
€3.99
TKR1235 – Body Clips (angled, 10pcs)
TKR8345 – Body (.040 lexan, NB48/48.3/48.4, w/ window mask)
€34.99
TKR8345 – Body (.040 lexan, NB48/48.3/48.4, w/ window mask)
TKR6145 – Shock Boots (for 137mm shocks, 2pcs)
€4.99
TKR6145 – Shock Boots (for 137mm shocks, 2pcs) The captured design of these shock boots will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They will keep your suspension system free and consistent without sacrificing any suspension up travel. They are a perfect length fit for their respective s...
TKR6144 – Shock Boots (for 122mm shocks, 2pcs)
€4.99
TKR6144 – Shock Boots (for 122mm shocks, 2pcs) The captured design of these shock boots will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They will keep your suspension system free and consistent without sacrificing any suspension up travel. They are a perfect length fit for their respective s...
TKRBB06103 – Ball Bearings (6x10x3, 4pcs)
€7.99
TKRBB06103 – Ball Bearings (6x10x3, 4pcs) EB48 and SCT410 bearings for the steering posts. 4pcs required in kit.
TKR5166 – Front Bumper (revised, EB/NB/ET/NT)
€5.99
TKR5166 – Front Bumper (revised, EB/NB/ET/NT) This bumper allows for more front ground clearance on your EB/NB/ET/NT48 vehicle as well as the EB48SL. By eliminating the bumper area under the chassis we have improved bump and jump handling dramatically. A single TKR1522 (M3x8mm cap head) screw secures the bumper in place.
TKR4213 – Clutch Bell (13t, NT48)
€19.90
TKR4213 – Clutch Bell (13t, NT48)
TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp, double hole)
€15.99
TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp, double hole) For: Futaba, Pro-Tek, Savox, Highest servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servos will be prot...
TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT)
€9.99
TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT) These are the hinge pin inserts for use with TKR5161, TKR5162, TKR5163, and TKR5164. They are also used for TKR5730. They are standard on the SCT410.3 and EB48SL and are 100% compatible with the EB/NB/ET/NT48 as well as the original SCT410 as long as you have the V2 hinge pin br...
TKR1524 – M3x12mm Cap Head Screws (black, 10pcs)
€3.99
TKR1524 – M3x12mm Cap Head Screws (black, 10pcs)
