Mugen Seiki HTD Differential Cup Outdrive (2)
Mugen Seiki MBX8 Aluminum Chassis (Revised)
This is the revised Mugen Aluminum Chassis for use with the MBX8 1/8 Nitro Buggy. This chassis has modified the shape of the part where the MUGE2712 engine mount washers rest, so the SJG 4x10mm screws can be made flat with the chassis.
Mugen Seiki 0.9mm Clutch Spring Set (3)
This is a set of optional 0.9mm clutch springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on. The later the clutch engages, the more the clutch will slip causing the clutch shoes to wear out more quickly. With these softer clutch springs the engine will ...
Mugen Seiki 5x10x4mm Bearing (2)
This is a set of two replacement Mugen 5x10x4mm Bearings, and are intended for use with the Mugen MBX family of 1/8 scale vehicles.
Mugen Seiki C0605 Bearings (6X10X3)
These are the stock Mugen 6x10x3mm ball bearings. There are 2 in a bag.
Mugen Seiki Engine Mount Washer Set (4)
This is a pack of four replacement Mugen Engine Mount Washers for use with the MBX8 line of nitro vehicles.
Mugen Seiki HTD Front/Rear Differential Set (42T)
This is an optional Mugen 42T Front/Rear HTD (High Traction Differential) Differential Set. This high traction differential set contains 10T/20T differential gears which can improve traction. The HTD also makes it possible to ensure the same traction even when using thinner diff than normal, which improves the steering and bump resistance.
Mugen Seiki B0765 Shim Set 5x7 (0.1/0.2/0.3, 10ea)
Shim Set 5x7 (0.1/0.2/0.3, 10ea)
Mugen Seiki 4x10mm SJG Flat Head Screw (10)
This is a pack of ten replacement 4x10mm flat head screws from Mugen Seiki.
15x21x4mm "HS" METAL SHIELDED BEARING SET (10pcs)
Code: 6702ZZStructure: -Size: 15x21x4 mmPrecision: ABEC-5Material: Chrome steel bearingSeal: Double metal shieldsColor: -
8x16x5mm SELECT "HS" METAL SHIELDED BEARING SET (10pcs.)
This is a pack of ten 8x16x5mm High Speed "HS" metal shielded ZZ 1/8 wheel bearings from Ultimate Racing. These 8x16x5 bearings are the standard bearing for 1/8th scale off-road vehicles, both for internal bearings in the diff cases as well as external wheel bearings. Please check the manual that came with your vehicle for the correct size if y...
15x21x4mm "HS" HYBRID SEALS BEARING SET (10pcs.)
This is a pack of ten 15x21x4mm High Speed "HS" from Ultimate Racing. These 15x21x4mm bearings are intended for use with the Mugen buggy and truggy 1/8 scale vehicles. This bearing is the stock replacement bearing for the inner wheel hub and can also be used as a standard bearing for other RC vehicles. Please check the manual that came with you...
FOAM AIR FILTER MUGEN MBX6/7/7R/8 (12 pcs)
This is the Ultimate Racing foam air filter, and it's been specially designed for use with Mugen MBX6R air filter. The combination of this foam air filter with the Ultimate Racing air filter oil guarantees the maximum air flow and offers an excellent air filtration and protection for your engine. Available in economic packs of 6 or 12 pieces an...